Skip to content
BJ 14216-40mm 16PSI 1.1 External Turbo Wastegate
- High performance stainless steel valve with bronze valve guide
- Silicon reinforced film for maximum life expectancy and heat resistance
- Ductile cast iron valve body for maximum temperature resistance and counterfeiting
- The valve body is equipped with thermal sinks to help dissipate the head and reduce heat on the diaphragm body
- An aluminum spring-cap to prevent changes to the spring rate due to heat, which allows a consistent energy level
- Include all necessary gaskets and nails (note you will need 1 / 16npt hose tape to fasten the reinforcement reference)>
- Spring 1.1bar 16psi is included and already installed for use
- 12.9 degree screws for maximum temperature and pressure resistance
- 1.40 "valve seat 1.20" flange port 38mm allowing easy blow
- Bolt spacing on wastegate flange 2.70 "x 1.75"
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
